Application

This unit of competency defines the skills and knowledge required to perform penetrant testing techniques in a range of industrial applications including fabrications, structures and components across a wide range of industries to Level 2 (AS 3669 Non-destructive testing — Qualification and approval of personnel — Aerospace and AS ISO 9712 Non-destructive testing — Qualification and certification of NDT personnel) or equivalent. It relates to portable penetrant testing, processing on a dedicated penetrant line, visible dye and fluorescent methods.
Penetrant tests are performed on critical component or structural zones. Re-assessment of competency may be required at regular intervals in accordance with Australian Standards or other relevant standards. Actual and potential defects are to be considered, together with ongoing abnormalities in fabrications, components, structures or aircraft components.
Materials and chemicals which are subject to codes and regulations - including, chemicals, explosives, solvents, dangerous materials, acids, or noxious waste products - are subject to safe work habits and must be stored and used in accordance with safe work practices.
Where interpretation of technical drawings is required unitMEM09002Interpret technical drawing should also be selected.
Where the selection and use of engineering measurement is required unitMEM12023Perform engineering measurements should also be selected.
Where the selection and use of industrial chemicals is required unitMEM13003Work safely with industrial chemicals and materials should also be selected.
Where the selection and use of power tools are required UnitMEM18002Use power tools/hand held operations should also be selected.
No licensing or legislative requirements apply to this unit at the time of publication. Certification against Australian Standards may be achieved where assessment in this unit of competency is carried out in conjunction with an examining authority as described in AS ISO 9712 Non-destructive testing — Qualification and certification of NDT personnel.
Band: B
Unit Weight: 4

What You'll Learn

Assessment Requirements

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria and include:
• following work instructions, standard operating procedures (SOPs) and safe work practices
• identifying and interpreting specifications, standards, charts, lists and other reference material for performing penetrant testing
• preparing the area for testing and identifying discontinuities including observed changes in material homogeneity in accordance with procedures
• applying test media and carrying out penetrant testing on at least two occasions using techniques appropriate for material/s to be tested, checking and confirming basic indicators and identifying all defects and classifying in accordance with national and international codes and standards
• performing measurements associated with penetrant testing on at least two occasions
• reporting test results in accordance with procedures and customer service requirements on at least two occasions.
Note: Where a volume and/or frequency is not specified, demonstration must be provided at least once.

Knowledge Evidence

Evidence required to demonstrate the required knowledge for this unit must be relevant to and satisfy the requirements of the elements and performance criteria and include knowledge of:
• safe work practices and procedures and use of personal protective equipment (PPE)
• cleaning and preparation processes and procedures and statutory and work health and safety (WHS) requirements in relation to the preparation process
• established assessment procedures and techniques
• types of discontinuities and their consequences or effect on the material
• penetrant testing techniques and procedures
• tools, equipment and techniques
• principles and applications of penetrant testing techniques
• maintenance and storage procedures for test equipment
• common faults and damage
• types of defects
• meaning and application of national and international codes and standards
• methods and/or procedures for reporting test results
• implications of test results for the particular material or application.

Assessment Conditions

• Assessors must:
• have vocational competency in performing penetrant testing at least to the level being assessed with relevant industry knowledge and experience
• satisfy the assessor requirements in the Standards for Registered Training Organisations 2015 or its replacement and comply with the National Vocational Education and Training Regulator Act 2011, its replacement or equivalent legislation covering VET regulation in a non-referring state/territory as the case requires.
• Where possible, assessment must occur in operational workplace situations. Where this is not possible or where personal safety or environmental damage are limiting factors, assessment must occur in a sufficiently rigorous simulated environment that reflects realistic operational workplace conditions that cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.
• Conditions for assessment must include access to all tools, equipment, materials and documentation required including relevant workplace procedures, product and manufacturing specifications.
• Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Foundation Skills

• {'skill': 'Foundation Skills', 'description': 'This section describes those language, literacy, numeracy and employment skills that are essential to performance.\nFoundation skills essential to performance are explicit in the performance criteria of this unit of competency.'}

Prerequisite Units

• MEM11011
• MEM13015
• MEM16006
• MEM18001
• MEM24012

Related Units

• MEM18059 — Modify electronic systems
  Same training package
• MEM08005 — Prepare and produce specialised coatings
  Same training package
• MEM07018 — Write basic NC and CNC programs
  Same training package
• MEM24005 — Perform basic eddy current testing
  Same training package
• MEM05079 — Perform welds to code standards using flux core arc welding process
  Same training package
• MEM13004 — Work safely with molten metals/glass
  Same training package