Application
This unit specifies the skills and knowledge required to diagnose faults in electronic security equipment and systems. It includes applying methodical diagnostic procedures, testing suspected fault scenarios, and assessing test results, historical information and operational data to diagnose faults and recommend options for rectification. This work applies in extra low voltage environments as defined in Australian StandardAS/NZS 2201.1:2007 Intruder alarm systems – Client’s premises – Design, installation, commissioning and maintenance(AS/NZS 2201).
A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.
Licensing, legislative or certification requirements apply to advising on, supplying, installing, maintaining, monitoring, repairing and servicing security equipment in some states and territories. For further information, check with the relevant regulatory authority.
What You'll Learn
1.
2.
3.
4.
Assessment Requirements
Performance Evidence
To demonstrate competency, a candidate must meet the performance criteria of this unit by conducting testing and diagnostic procedures on two different electronic security equipment and systems to diagnose a minimum of three faults.
Knowledge Evidence
To be competent in this unit, a candidate must demonstrate knowledge of:
• workplace policies and procedures that ensure compliance with legislative and regulatory requirements when diagnosing faults in electronic security equipment and systems:
• licensing requirements and limits of own authority
• privacy requirements
• reporting and documentation
• requirements for complying with Australian Communications and Media Authority cabling rules
• work health and safety
• application of AS/NZS 2201.1:2007 Intruder alarm systems – Client’s premises – Design, installation, commissioning and maintenance (AS/NZS 2201) when diagnosing security equipment and system faults at client premises
• cable identification methods and techniques
• documentation to be completed when diagnosing faults in electronic security equipment and systems
• keypad and control panel types and functions for a range of electronic security equipment and systems
• materials, tools and equipment including personal protective equipment (PPE) used when diagnosing faults in electronic security equipment and systems
• methods for ensuring IP networked systems and equipment are properly secured
• operational parameters and diagnostic testing procedures for a range of electronic security equipment and systems:
• access control systems
• audible and visual warning devices
• cameras and monitors
• commercial and residential alarm systems
• detection devices
• fire safety and fire locking systems
• intercoms and control panels
• locks and locking systems
• readers
• screen equipment
• security doors and door controls
• operational principles of data transmission networks
• types and functions of computer software associated with electronic security equipment and systems
• types of earthing systems used in electrical installations
• types of electrical connections and circuits encountered when diagnosing faults in electronic security equipment and systems, and circuit protection requirements
• typical hazards encountered when diagnosing faults in electronic security equipment and systems and the control measures for each:
• confined spaces
• electrical
• hazardous materials and chemicals
• people in the work area
• power tools
• vermin
• work at heights.
Assessment Conditions
Assessors must meet the requirements for assessors contained in the Standards for Registered Training Organisations.
All individuals engaged by a licensed RTO for security licensing purposes must hold both a security trainers licence (where such a licence exists within the relevant jurisdiction) and the licence for performing the security activities for which the individual is providing training or assessment. Regulators may impose other assessor conditions to meet jurisdictional assessment requirements.
Assessment must be conducted in the workplace or in a simulated workplace environment. Candidates must have access to:
• workplace policies and procedures, work instructions, documentation, electronic security equipment and systems, PPE, tools and materials required to achieve the performance evidence
• security equipment and system information to support diagnostic activities
• AS/NZS 2201.
Foundation Skills
- {'skill': 'Foundation Skills', 'description': 'As well as the foundation skills explicit in the performance criteria of this unit, candidates require:\n• reading skills to interpret key requirements of:\n • plans and specifications to locate equipment and system components\n • Australian standards and manufacturers’ instructions.'}
Parent Qualifications
Related Units
-
CPPSEC3037 — Test installed security equipment and systems
Same training package
-
CPPSEC3041 — Conduct routine service of security equipment and systems
Same training package
-
CPPSEC2021 — Install security equipment and systems
Same training package
-
CPPFES2027 — Inspect, test and maintain non-gaseous pre-engineered fire-suppression systems
Same training package
-
CPPSEC3038 — Commission and decommission security equipment and systems
Same training package
-
CPPSEC3047 — Provide estimate and quote on security system installations
Same training package
Generate Compliant Training Materials for CPPSEC3039
RTOFlow automatically creates learner guides, assessment workbooks, marking guides, and trainer resources aligned to this unit of competency — saving you weeks of manual work.
Request Early AccessLast updated from training.gov.au: 08 March 2026